LQ-N
UPG & LQ
Aluminum foil
Aluminum blister foil sealable to PS, PVC, PP, PE, PET is heat seal coated on bright side and print-treat coated on matte side,all coatings are food safe and meet FDA requirement for direct contact with food and pharmaceuticals.
Structure(From Outside to Inner Side):Primer /20- 38mic AL / HSL
Sr. No. | Parameters | Unit | Standard Valuable | Specification Tolerance |
1 | Primer | g/m² | 1.0 | 0.8-1.2 |
2 | Al-Foil gauge | g/m² | 102.9 | 94.8-111.1 |
3 | HSL | g/m² | 6 | 5-7 |
4 | Width | mm | 700 | 699.9-700.1 |
5 |
Pinholes |
Nos/m² |
0 |
0 |
6 | Core I.D. | mm | 76 | (-0 / +1) |
7 | Core type | -- | Plastic/Al/Paper (As per customer requirement) | As per customer requirement |
8 | Core O.D. | mm | 250 | 200-300 |
9 | No. Of Joints | Nos. | 0 | Max. 2 |
10 | Uncoil Performance | -- | Glue layer can’t be adhesive with protective layer | Not adhesive |
Material Properties | ||||
11 | Melting point of thermosealable vanish | 110℃+/- 10 | ||
12 | Primer for printing resistance to temperature | ≤250℃ | ||
13 |
Heat seal strength of sticky layers | ≥7.0N/15mm(PVC) | ||
≥8.0N/15mm(PS,PP,PET) | ||||
14 | Broken Strength | ≥98kPa |
Aluminum foil
Aluminum blister foil sealable to PS, PVC, PP, PE, PET is heat seal coated on bright side and print-treat coated on matte side,all coatings are food safe and meet FDA requirement for direct contact with food and pharmaceuticals.
Structure(From Outside to Inner Side):Primer /20- 38mic AL / HSL
Sr. No. | Parameters | Unit | Standard Valuable | Specification Tolerance |
1 | Primer | g/m² | 1.0 | 0.8-1.2 |
2 | Al-Foil gauge | g/m² | 102.9 | 94.8-111.1 |
3 | HSL | g/m² | 6 | 5-7 |
4 | Width | mm | 700 | 699.9-700.1 |
5 |
Pinholes |
Nos/m² |
0 |
0 |
6 | Core I.D. | mm | 76 | (-0 / +1) |
7 | Core type | -- | Plastic/Al/Paper (As per customer requirement) | As per customer requirement |
8 | Core O.D. | mm | 250 | 200-300 |
9 | No. Of Joints | Nos. | 0 | Max. 2 |
10 | Uncoil Performance | -- | Glue layer can’t be adhesive with protective layer | Not adhesive |
Material Properties | ||||
11 | Melting point of thermosealable vanish | 110℃+/- 10 | ||
12 | Primer for printing resistance to temperature | ≤250℃ | ||
13 |
Heat seal strength of sticky layers | ≥7.0N/15mm(PVC) | ||
≥8.0N/15mm(PS,PP,PET) | ||||
14 | Broken Strength | ≥98kPa |