You are here: Home » PRODUCTS » Printing & Finishing Machinery » Pre-Press Machinery » Flexo CTP plate making machine » DX 940F Flexo CTP Platesetter

ALL PRODUCTS

Share to:

DX 940F Flexo CTP Platesetter

DX940F Flexo CTP Platesetter

Quantity:
  • DX 940F
  • UPG
  • UPG-DX660F

Technical superiority:

1.Special laser diodes with high laser power (wavelength: 830nm)

2.Liner motor scanning system (stable and reliable)

3.Fully automatic dynamic pressure balancing adsorption system (convenient plate   loading)

4.Dual network interface:

      Interface 1: For PC data transfer
    Interface 2: For remote control (For information exchange of two screens, remote after service and system upgrading)
5.Automatic adjusting
for tolerance (automatic adjusting for the tolerance between plates and drum of printing machine, don’t need to adjust it on RIP software)   

 

Technical parameters:
                                                 

Model

DX940F-I

DX940F-II

Productivity

1.3/2.5㎡/h

2.6/5.0㎡/h

Max. plate size

940×675mm(37×26 inches)

Plate thickness

0.95~3.94mm

Output media

Digital flexographic water-washable letterpress plates;

Digital flexographic water-washable plates;

Digital flexographic solvent-washable plates ;

Thermal(0.15mm) CTP plates.

Application

Label printing、Trade mark

Resolution

4800DPI /2400DPI (Switch)、4000DPI

Loading method

Manual loading 

Interface

Gigabit Ethernet

External dimension(mm)

L×W×H=1425mm×980mm×1150mm,750kg

Power supply

AC 220V 50/60HZ 5kW Peak (Single phase)

Environment

Best environment temperature 18-30℃,Humidity 40-70% non condensing


Product Inquiry
Copyright ©  Shanghai UPG International Trading Co.,Ltd All rights reserved. Privacy Policy      Supported by Leadong