UPG
1. Molding wheel adopt box type suspended structure, easy to change mould.
2. Dual-motor synchronous modulation and stronger traction.
3. Touch screen and humancomputer interface of servo system, the operation is more personalization, the
adjustment of air cylinder is more convenient.
4. Automatic alarm, fault tips, easy to adjust and maintenance. Automatic calculate producing and products without manual count.
5. Glue temperature control automatically gluing, high production speed with good quality under lower temperature.
6. Adopt hoist to load the raw material, relieve the power of work.
1. Molding wheel adopt box type suspended structure, easy to change mould.
2. Dual-motor synchronous modulation and stronger traction.
3. Touch screen and humancomputer interface of servo system, the operation is more personalization, the
adjustment of air cylinder is more convenient.
4. Automatic alarm, fault tips, easy to adjust and maintenance. Automatic calculate producing and products without manual count.
5. Glue temperature control automatically gluing, high production speed with good quality under lower temperature.
6. Adopt hoist to load the raw material, relieve the power of work.
2) Gluing system
Glue pump with automatic flowing and coated.
Glue pump can auto regulation fixed amount glue.
3) Composing device
4) Form feed part
3 set pressure wheels unit.
Pressure adjust by air cylinder.
1000±1mm. Touch screen and servo system control,cutting precision is 1000±1mm.
5) Hot finalize the design part
This part makes the quality of paper angle bead better.
6) Cutting Unit
Type of transmission servo-cutting
Cut driving servo-driving
Knife The cutter adjust by oil pressure.
7) Automatic Delivery Table
8) Main electric listing
Servo system…………………………………………Panasonic
PLC………………………………………………….Panasonic
Relay………………………………………………..OMRON
Touch screen………………………………………..WEILEN (made in Taiwan)
2) Gluing system
Glue pump with automatic flowing and coated.
Glue pump can auto regulation fixed amount glue.
3) Composing device
4) Form feed part
3 set pressure wheels unit.
Pressure adjust by air cylinder.
1000±1mm. Touch screen and servo system control,cutting precision is 1000±1mm.
5) Hot finalize the design part
This part makes the quality of paper angle bead better.
6) Cutting Unit
Type of transmission servo-cutting
Cut driving servo-driving
Knife The cutter adjust by oil pressure.
7) Automatic Delivery Table
8) Main electric listing
Servo system…………………………………………Panasonic
PLC………………………………………………….Panasonic
Relay………………………………………………..OMRON
Touch screen………………………………………..WEILEN (made in Taiwan)
Flat paper board size | Side length 25mm-120mm |
Production speed | Economic speed:40m/min |
Cut precision | 1000 ± 1mm |
Max. quantity of layer | 13(layer) |
Min. cutting length (speed is 10m/min) | 100mm, |
Sharp of the angles | V |
Thickness of the angles | 2-10mm |
Paper requirements | surface paper 200-250g, Kraft inner paper420~520g ,bobbin paper |
Dimension | 24500x1350x1700mm |
Total weight | 6500kg |
Total Power of motor | 17kw |
The power of hot finalize the design | 6.5kw |
The power of glue heating | 4.5kw |
Compressed air | 0.6Mpa/0.2m3 (provide by oneself) |
Flat paper board size | Side length 25mm-120mm |
Production speed | Economic speed:40m/min |
Cut precision | 1000 ± 1mm |
Max. quantity of layer | 13(layer) |
Min. cutting length (speed is 10m/min) | 100mm, |
Sharp of the angles | V |
Thickness of the angles | 2-10mm |
Paper requirements | surface paper 200-250g, Kraft inner paper420~520g ,bobbin paper |
Dimension | 24500x1350x1700mm |
Total weight | 6500kg |
Total Power of motor | 17kw |
The power of hot finalize the design | 6.5kw |
The power of glue heating | 4.5kw |
Compressed air | 0.6Mpa/0.2m3 (provide by oneself) |