You are here: Home » Products » Plastic Machinery » Extruder Machinery » Bottle blowing machine » LQ10D-560 Blow Molding Machinery

ALL PRODUCTS

Share to:

LQ10D-560 Blow Molding Machinery

UPG Blow Molding Machine is based on accurate calculation of die runner design, which is streamlined, has no dead angle and can change color quickly

Quantity:
  • LQ10D-560
  • UPG

Introduction:


Basic Machine

Carriage with linear motion system

  1.  Consisting of machine frame, extruder base frame and rear mounted control cabinet

  2.  Horizontal mold carriage movement forward/backward on linear roller bearings

  3.  Parallel opening/closing of blow mold, mold clamping area unobstructed by tie bars, fast build up of clamping  force, variation in mold thickness possible

  4.  Extrusion head lifting/lowering allowing continuous high parison extrusion head


Hydraulic Unit

Integrated in the machine frame

1. Bosch-Rexroth servo variable speed pump and high pressure dosing pump, accumulator assisted, with energy saving function

2. Oil cooling circuit equips with heat exchanger, temperature control and maximum oil temperature alarm

3. Electrical monitoring of oil filter pollution and low oil level

4. Hydraulic oil temperature controlled by PLC, ranging from 30oC~40oC

5. The hydraulic unit is delivered without oil

6. Tank capacity: 400 Liters

    Drive power:18.5kW Bosch-Rexroth servo pump &7.5kW VOITH dosing pump


Specification:


ModelLQ10D-560
ExtruderE60
Extrusion Head

DS50-4F/1L-CD120

4-Fold/ 1-layer /Center distance:120mm

Article Description250ml 330ml HDPE botttle
Article Net Weight30g
Cycle Time22 seconds
Production Capability1300 pcs/hour




Mold Specification:


Clamping force100 kN (max 125 kN)
Width(max)550mm
Length(max)400mm
Thickness(min)2×120 mm
Mold weight(max)2×350 kg
Daylight(max)500mm
Daylingt(min)220mm
Claping stroke(max)280mm
Carriage shuttle stroke560mm


Product Inquiry
Copyright ©  Shanghai UPG International Trading Co.,Ltd All rights reserved. Privacy Policy      Supported by Leadong