Availability: | |
---|---|
LQ5L-1800
UPG
1. Extruder
1.1 Screw diameter: 65; 55; 65; 55;65
1.2 L/D ratio: 30:1
1.3 Max screw speed:100r/min
1.4 Screw Structure: Mixed type, with barrier
1.5 Screw and Barrier material: 38CrMoAl, Bi-metallic
1.6 Heater type: ceramic heater.
1.7 Temperature Control: 5 zone; 4zone; 5 zone;4 zones;5 zones
1.8 Barrel Heater power: 60kw
1.9 Main motor: 37KW;30kw; 37kw; 30kw;37KW. (SIEMENS BEIDE)
1.10 Inverter: 37KW;30kw; 37kw; 30kw;37KW. (SINEE)
1.11 Gear box size: A: 200#, B: 180#, C: 200#,D: 180#, E: 200# (SHANDONG WUKUN)
1.11 Screen Changer: hydraulic screen changer: 5 sets
2. Die head
2.1 Die head type: A+B+C+D+E fixed IBC type die head.
2.2 Die head material: Alloy steel forging and heat treatment;
2.3 Die head width: ◎400mm
2.4 Channel and surface hard chromium plating
2.5 Heater: Aluminum ceramics heater.
3. Cooling Device (with IBC system)
3.1 Type: 800mm double lips air ring
3.2 Material: cast aluminum.
3.3 Main Air blower: 11 kw:
3.4 Film bubble cold air exchange device; Hot air channel and cold air channel mutual independence
3.5 Film Bubble monitor sensor: Import ultrasound Probe (3 sets), Controlling the film bubble size.
3.6 Inlet air blower: 7.5kw
3.7 Outlet air blower: 7.5kw
3.8 Automatic wind, automatic air suction
4. Bubble Stabilizing frame
4.1 Structure: Circular type
5. Collapsing Frame & Gusset board
5.1 Material: Steel structure frame with special material
5.2 Adjusting mode:manual
6. Haul-off Ocillation Traction System
6.1 Traction roller: 1800mm
6.2 Effective film width: 1600mm
6.3 Traction Motor power: 4.5kw (adjust by inverter) three-phase asynchronous motor
6.4 Traction speed: 70m/min
6.5 Up traction rotating motor: 4.5kw (adjust by inverter)
6.6 Down traction motor: 4.5kw (adjust by inverter)
6.7 Moving of the roll is driven by pneumatic
6.8 Traction roller material: Ethylene-Propylene-Diene Monomer
6.9 EPC Edge correction system
7. Trimming device
7.1 Middle Section: 3 pcs
7.2 Edge Section device: 2 pcs
8. Manual Back to Back Double Winders:
No. | Parts | Parameters | Quantity | Brand |
1 | Winding Motor | 4.5 kw | 2 sets | |
2 | Winding Inverter | 4.5 kw | 2 sets | Sinee Inverter |
3 | traction Motor | 4.5 kw | 1 set\ | |
4 | traction Inverter | 4.5 kw | 1 set | Sinee Inverter |
5 | Main winding rubber roller | EPDM | 2 pcs | EPDM |
6 | Banana roller | Encapsulated | 2 pcs | |
7 | PLC | 1 set | Delta | |
8 | Air shaft | Diameter Φ76mm | 4 pcs | |
9 | Air cylinder | Airtac Taiwan | ||
10 | Flying Knife | 2.0M | 2 pcs |
9. Regular electrical control system (CE certificate)
No | Item | Brand |
1 | Electric appliance: Switch, button, contractor etc. | Delixi Electric |
2 | Main Motor Inverter | SINEE |
3 | Solid state relay | FORTEK TAIWAN |
4 | Machine cable | International standards |
5 | Temperature controller | HUIBANG |
10. Tower
10.1 Structure: Disassemble, with safety operating platform and protective barrier
1. Extruder
1.1 Screw diameter: 65; 55; 65; 55;65
1.2 L/D ratio: 30:1
1.3 Max screw speed:100r/min
1.4 Screw Structure: Mixed type, with barrier
1.5 Screw and Barrier material: 38CrMoAl, Bi-metallic
1.6 Heater type: ceramic heater.
1.7 Temperature Control: 5 zone; 4zone; 5 zone;4 zones;5 zones
1.8 Barrel Heater power: 60kw
1.9 Main motor: 37KW;30kw; 37kw; 30kw;37KW. (SIEMENS BEIDE)
1.10 Inverter: 37KW;30kw; 37kw; 30kw;37KW. (SINEE)
1.11 Gear box size: A: 200#, B: 180#, C: 200#,D: 180#, E: 200# (SHANDONG WUKUN)
1.11 Screen Changer: hydraulic screen changer: 5 sets
2. Die head
2.1 Die head type: A+B+C+D+E fixed IBC type die head.
2.2 Die head material: Alloy steel forging and heat treatment;
2.3 Die head width: ◎400mm
2.4 Channel and surface hard chromium plating
2.5 Heater: Aluminum ceramics heater.
3. Cooling Device (with IBC system)
3.1 Type: 800mm double lips air ring
3.2 Material: cast aluminum.
3.3 Main Air blower: 11 kw:
3.4 Film bubble cold air exchange device; Hot air channel and cold air channel mutual independence
3.5 Film Bubble monitor sensor: Import ultrasound Probe (3 sets), Controlling the film bubble size.
3.6 Inlet air blower: 7.5kw
3.7 Outlet air blower: 7.5kw
3.8 Automatic wind, automatic air suction
4. Bubble Stabilizing frame
4.1 Structure: Circular type
5. Collapsing Frame & Gusset board
5.1 Material: Steel structure frame with special material
5.2 Adjusting mode:manual
6. Haul-off Ocillation Traction System
6.1 Traction roller: 1800mm
6.2 Effective film width: 1600mm
6.3 Traction Motor power: 4.5kw (adjust by inverter) three-phase asynchronous motor
6.4 Traction speed: 70m/min
6.5 Up traction rotating motor: 4.5kw (adjust by inverter)
6.6 Down traction motor: 4.5kw (adjust by inverter)
6.7 Moving of the roll is driven by pneumatic
6.8 Traction roller material: Ethylene-Propylene-Diene Monomer
6.9 EPC Edge correction system
7. Trimming device
7.1 Middle Section: 3 pcs
7.2 Edge Section device: 2 pcs
8. Manual Back to Back Double Winders:
No. | Parts | Parameters | Quantity | Brand |
1 | Winding Motor | 4.5 kw | 2 sets | |
2 | Winding Inverter | 4.5 kw | 2 sets | Sinee Inverter |
3 | traction Motor | 4.5 kw | 1 set\ | |
4 | traction Inverter | 4.5 kw | 1 set | Sinee Inverter |
5 | Main winding rubber roller | EPDM | 2 pcs | EPDM |
6 | Banana roller | Encapsulated | 2 pcs | |
7 | PLC | 1 set | Delta | |
8 | Air shaft | Diameter Φ76mm | 4 pcs | |
9 | Air cylinder | Airtac Taiwan | ||
10 | Flying Knife | 2.0M | 2 pcs |
9. Regular electrical control system (CE certificate)
No | Item | Brand |
1 | Electric appliance: Switch, button, contractor etc. | Delixi Electric |
2 | Main Motor Inverter | SINEE |
3 | Solid state relay | FORTEK TAIWAN |
4 | Machine cable | International standards |
5 | Temperature controller | HUIBANG |
10. Tower
10.1 Structure: Disassemble, with safety operating platform and protective barrier
1. | Film Thickness | 0.02-0.2 | MM |
2. | Film Width | 1600 | MM |
3. | Film thickness tolerance | +-6% | |
4. | Suitable Material | PE;Tie;PA | |
5. | Extrusion Output | 200-300 | KG/H |
6. | Total Power: | 280 | KW |
7. | Voltage | 380/50 | V/HZ |
8. | Weight | About 15000 | KG |
9. | Over Dimension: (L*W*H) | 10000*7500*11000 | MM |
10. | Certification :CE;SGS BV |
1. | Film Thickness | 0.02-0.2 | MM |
2. | Film Width | 1600 | MM |
3. | Film thickness tolerance | +-6% | |
4. | Suitable Material | PE;Tie;PA | |
5. | Extrusion Output | 200-300 | KG/H |
6. | Total Power: | 280 | KW |
7. | Voltage | 380/50 | V/HZ |
8. | Weight | About 15000 | KG |
9. | Over Dimension: (L*W*H) | 10000*7500*11000 | MM |
10. | Certification :CE;SGS BV |