The mold head mechanism: the use of the split type of the head,not channeling material,more uniform,more uniform ,plating processing,not accumulating material,the material is more smooth.
Quantity: | |
---|---|
1. The mold head mechanism: the use of the split type of the head,not channeling material,more uniform,more uniform ,plating processing,not accumulating material,the material is more smooth.
2. Plasticizing system:frequency conversion motor Hardened reducer with high quality nitride barrel screw,variable frequency speed control,energy efficient and stable yield.
3. Electronic control system:the use of PLC man-machine interface,all parameters set,modify,retrieval can be seen as the operation,the system runs stable,accurate positioning indeed.
4. Application areas:food,medicine,petroleum,chemical,chemical,automotive,tool,toys and other industries.
5. Can be equipped with automatic overflow device:supporting cutting device and pull the end device,automatic operation,save labor.
Specification | SLBS-100 | |
Material | PE,PP,EVA,ABS,PS… | |
Max container capacity | L | 50 |
Output(dry cycle) | pc/hr | 300*2 |
Machine Dimension(LxWxH) | M | 6400*6400*4000 |
Total weight | Ton | 20T |
Clamping Unit | ||
Clamping force | KN | 200 |
Platen opening stroke | MM | 350-850 |
Platen size(WxH) | MM | 850*800 |
Max mould size(WxH) | MM | 590*700 |
Mold thickness | MM | 360-500 |
Extruder unit | ||
Screw diameter | MM | 100 |
Screw L/D ratio | L/D | 28 |
Melting capacity | KG/HR | 160 |
Number of heating power | KW | 28 |
Extruder heating power | Zone | 5 |
Extruder driving power | KW | 45 |
Die head | ||
Number of heating zone | Zone | 5 |
Power of die heating | KW | 18 |
Max die-pin diameter | MM | 260 |
Power | ||
Max drive | KW | 42 |
Total power | KW | 120 |
Fan power for screw | KW | 4 |
Air pressure | Mpa | 0.8 |
Air consumption | m³/min | 0.8 |
Average energy consumption | KW | 45 |
Accumulator capacity | L | 10 |