LQ-MD 370-PRO
UPG
LQ-MD 370-PRO
Configuration:
1. Unwind unit
-Automatic stop on roll end.
-Pre-determining electronic counter.
-Pre-select slow down.
-Eurdow Electronic web guiding system and Ultrasonic web guide sensor.
2. Semi rotary flexo unit (It can exchangeable between semi rotary and full rotary).
-1 anilox roller
-1 printing roller 140T
-1 UV dryer
-1 cold foil/lamination unit.
3. Semi rotary die cutting station (It can exchangeable between semi rotary and full rotary).
-1 magnetci cylinder 140T
-1 matrix waste unit
4. Touch screen operation interface- Proface, Schneider.
5. Slitting unit
-Rotary blade unit including 10 knives.
6. Dual rewinder with 3” air shaft.
Configuration:
1. Unwind unit
-Automatic stop on roll end.
-Pre-determining electronic counter.
-Pre-select slow down.
-Eurdow Electronic web guiding system and Ultrasonic web guide sensor.
2. Semi rotary flexo unit (It can exchangeable between semi rotary and full rotary).
-1 anilox roller
-1 printing roller 140T
-1 UV dryer
-1 cold foil/lamination unit.
3. Semi rotary die cutting station (It can exchangeable between semi rotary and full rotary).
-1 magnetci cylinder 140T
-1 matrix waste unit
4. Touch screen operation interface- Proface, Schneider.
5. Slitting unit
-Rotary blade unit including 10 knives.
6. Dual rewinder with 3” air shaft.
1. Servo motor: Panasonic Japan, 8 sets, for printing and die cutting.
2. Control unit: Trio emotion controller, UK .
3. HMI: Pro-face, Schneider, 10” for main machine.
4. Inverter: China 3 pcs, for cold foil rewind, waste rewind, final roll rewind.
5. Inverter motor: China 3 pcs, for cold foil rewind, waste rewind, final roll rewind.
6. Servo motor reducer: Shimpo Japan, 8 sets.
7. Magnetic powder: China, 3 pcs of 5kg, for 1 unwinder and 2 rewinder.
China, 3 pcs of 1.5kg, for waste rewind and cold foil unwind rewind.
8. Web guide: Eurdow, China
9. Track sensor: Leuze Germany, 2 pcs
10. Bearing: NSK or NTN Japan
11. Pneumatic parts: China
12. Timing belt: China
13. Low voltage: Schneider France
1. Servo motor: Panasonic Japan, 8 sets, for printing and die cutting.
2. Control unit: Trio emotion controller, UK .
3. HMI: Pro-face, Schneider, 10” for main machine.
4. Inverter: China 3 pcs, for cold foil rewind, waste rewind, final roll rewind.
5. Inverter motor: China 3 pcs, for cold foil rewind, waste rewind, final roll rewind.
6. Servo motor reducer: Shimpo Japan, 8 sets.
7. Magnetic powder: China, 3 pcs of 5kg, for 1 unwinder and 2 rewinder.
China, 3 pcs of 1.5kg, for waste rewind and cold foil unwind rewind.
8. Web guide: Eurdow, China
9. Track sensor: Leuze Germany, 2 pcs
10. Bearing: NSK or NTN Japan
11. Pneumatic parts: China
12. Timing belt: China
13. Low voltage: Schneider France
Max. Web width | 380mm |
Max. Unwind diameter | 800mm |
Max. Up rewind diameter | 600mm |
Max. Lower rewind diameter | 800mm |
Max. Flexo/die cutting width | 370mm |
Repeat printing length | 200mm - 444.5mm |
Printing plate thickness | 1.14mm |
Double side adhesive tape | 0.38mm |
UV power | 7.5kw |
Cold foil unwind and rewind diameter | 300mm |
Full rotary max. Mechanical speed | 120m/min |
Die cutting precision | +/-0.15mm |
Auto setup slitting min. width | +/-0.1mm |
Air supply | 100 psi |
Rating voltage | 380V, 3Ph |
Max. Web width | 380mm |
Max. Unwind diameter | 800mm |
Max. Up rewind diameter | 600mm |
Max. Lower rewind diameter | 800mm |
Max. Flexo/die cutting width | 370mm |
Repeat printing length | 200mm - 444.5mm |
Printing plate thickness | 1.14mm |
Double side adhesive tape | 0.38mm |
UV power | 7.5kw |
Cold foil unwind and rewind diameter | 300mm |
Full rotary max. Mechanical speed | 120m/min |
Die cutting precision | +/-0.15mm |
Auto setup slitting min. width | +/-0.1mm |
Air supply | 100 psi |
Rating voltage | 380V, 3Ph |