You are here: Home » PRODUCTS » Printing & Finishing Machinery » Post-Press Machinery » Sheeting & Slitting machine » QFJ-600F/900F Thermal Paper Slitting and Rewinding Machine

ALL PRODUCTS

BACK TO PREVIOUS

This product has been off the shelf!

QFJ-600F/900F Thermal Paper Slitting and Rewinding Machine

Share to:

QFJ-600F/900F Thermal Paper Slitting and Rewinding Machine

It is mainly applied for slitting thermal paper, fax paper, cash register paper, carbonless paper, and other kinds of paper grammage that less than 250gsm. It equips PLC +touch screen control, automatic tension control, automatic product separation, automatic counting, automatic pneumatic loading system, which make it easy to operate by only one worker. Its features are high speed and stability, high precision, and long working life. The defective rate is only 3‰.It brings much more profit to clients than before. It is the most ideal slitting machine for small size paper roll producing.

Availability:

Model:
QFJ-600F/900F
Brand:
UPG

Product Description

QFJ-600F/900F Thermal Paper Slitting and Rewinding Machine

Model Type	600F	900F
Max. Parent Web Width	600mm	900mm
Max. Parent Web Diameter	1000mm
Max. Rewinding Diameter	200mm
Slitting Width	Disc Type Blade（57mm，79mm）other size could be customized.
Thickness Range	Paper: under 250gsm
Max. Machine Speed	200m/min
Power	3kw	4kw
Rewind Inner Core Diameter	Φ12.7 14 18 25.4mm or as request (3 size for free)
Tolerance of Slitting Width	≤±0.15mm (Depends on the raw material)
Unwinding Shaft	3” Pneumatic Air Expanding Shaft
Voltage	220V 50hz or 60hz
Overall Dimension	1.8x3.0x1.8m	2.1x3.0x1.8m
Weight	1500kgs	2500kgs

SPECIFICATIONS:

Application Material:

Ø Thermal Paper, Cash Register Paper, Fax Paper, ATM Paper, Bond Paper, Non-woven Cloth Caronless Paper,Concern Paper,Queuing Paper,Air Ticket Paper,,Boarding Paper,Film Paper,Movie Paper,etc.

Main Features:

Ø Equipped with PLC and touch screen, all the parameter are displayed on the monitor. You only need to setup the material roll diameter and thickness, the PLC will give a proper parameters for machine running automatically.

Ø Equipped with Frequency Inverters for speed control.

Ø All transmission rollers have been dynamic/static balance treated.

Ø Equipped with emergency switch.

Unwinding Section:

Ø 3” air expanding shaft.

Ø Equipped with automatic lift-up loading system.

Ø Electromagnetic brake.

Ø Fully automatic tension controller.

Slitting Section:

Ø Equipped with disc cutter.

Ø Cutter with adjustable and fixed blade base, which stops the cutting position from drifting and increase the cutting precison.

Ø Meter counter.

Winding Section:

Ø Surface rewinding technology

Ø Rubber banana roll to elimate the possible wrinkes during feeding.

Ø Pressure roller

Ø Electromagenetic Clutch

Ø Automatic end roll separation device, just press the button on the control board.

Controlling Section:

Ø Inovance PLC

Ø All the parameters are displayed on the monitor. (LCD)

Ø Low voltage electrical appliances all from Schneider

Coloring Section:

Ø Equipped with coloring unit, 1color only

Trimmed Waste:

Ø Equipped with airblower and expulsion tube.

PLC	MITSUBISHI China
Touch Screen	MITSUBISHI China
Main Engine	China
Frequency Inverter	Inovance China
Tension Controller	PLC
Transmission Roller	Hard chromium plating roller
Position System	Taiwan KONTEC brand photocell

	Rewinding performance
	Synchronous motor Photocell tracking eye For edge rectification
	Pneumatic loading stand Magnetic brake
	Lower cutting knife shaft (fixed size)
	Roller All the transmission rollers are static/dynamic treatment. Cutter Section
	Grating Protection: for emergency stop
	Automatic end roll separation knife, only by press the cut button on the control panel.
	PLC Tension board Electric elements
	Control cabinet PLC+HMI