LQ
UPG
Suitable for all kinds of offset printing ink, thermosetting ink.
Suitable for all kinds of offset printing ink, thermosetting ink.
1.This product has strong cleaning ink function, non-toxic, odorless, non-flammable, safe to store.
2.No adverse effects and damage to the ink roller and PS plate
3.Concentrated ink cleaning agent cleaning printing machine compared with gasoline, cleaning time and cleaning effect are the same, the cost of consumption is lower than gasoline! And more secure!
4.Compliance with voe detection
1.This product has strong cleaning ink function, non-toxic, odorless, non-flammable, safe to store.
2.No adverse effects and damage to the ink roller and PS plate
3.Concentrated ink cleaning agent cleaning printing machine compared with gasoline, cleaning time and cleaning effect are the same, the cost of consumption is lower than gasoline! And more secure!
4.Compliance with voe detection
1.Before starting up, the car wash water spray on the ink bucket and rotating roll, after washing the ink roller to scrub ink duct and rotating roll.
2.Turn on the machine (to maximum speed) and spray an appropriate amount of
Blanket and roller wash agent on the roller. Spray back and forth 2-3 times, 15-20
seconds between each spray (larger machine takes longer).After run for 1-2
minutes then tightening the ink scraping (pay special attention to this).
3.After tightening the ink scraping, and the ink scraping roller connection is good,
about 1 minute ink on the roller is scraped clean, if the ink roller is not clean,
should continue to add an appropriate amount of Blanket and roller wash in the
ink roller is not clean, until clean.
1.Before starting up, the car wash water spray on the ink bucket and rotating roll, after washing the ink roller to scrub ink duct and rotating roll.
2.Turn on the machine (to maximum speed) and spray an appropriate amount of
Blanket and roller wash agent on the roller. Spray back and forth 2-3 times, 15-20
seconds between each spray (larger machine takes longer).After run for 1-2
minutes then tightening the ink scraping (pay special attention to this).
3.After tightening the ink scraping, and the ink scraping roller connection is good,
about 1 minute ink on the roller is scraped clean, if the ink roller is not clean,
should continue to add an appropriate amount of Blanket and roller wash in the
ink roller is not clean, until clean.
Burning point | 87%-90% |
Packing | 18L/ drum |
Burning point | 87%-90% |
Packing | 18L/ drum |