Availability: | |
---|---|
Quantity: | |
PDF Export | |
LQ-ZW-D
UPG
Description:
LQ-ZW-D paper bowl machine is the automatic environmental machine with multi-running positions. This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom punching, heating, rolling, rimming, rounding and tripping. If you need double pe coated paper cups or paper gram higher 250kg, we recommend you to use Ultrasonic set, it can produce single pe coated paper cups and double pe coated paper cups.
Advantage and Improvement:
1.We use 150 type gear box,which is longer life and more accurate.Normally, 100 type gear box is used.
2.100 type speed reducer is used instead 80 type.
The speed reducer and the gear box are very important to the machine.They control the whole machine,if there are some problems with these two parts,then,you have to change the gear box and speed reducer.In this case,the machine should be taken apart,because they are inside the machine.It takes much time,and sometimes you cannot install the machine correctly.So it is necessary to use better gear box and speed reducer.
3.New design knurling wheel is used to guarantee the even pressure and better bottom sealing.
4.Cup folding parts is controlled by three separate cams,and each folding clip can be adjusted by itself.
5.Change the Ø25 normal steel shaft to Ø30 imported steel shaft to be sttrengthened,longer life and more stable.
6.Organ type sucker is used for cup fan sucked to gaurantee powerful sucking and more successful.The life is much more longer than normal sucker.
Description:
LQ-ZW-D paper bowl machine is the automatic environmental machine with multi-running positions. This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom punching, heating, rolling, rimming, rounding and tripping. If you need double pe coated paper cups or paper gram higher 250kg, we recommend you to use Ultrasonic set, it can produce single pe coated paper cups and double pe coated paper cups.
Advantage and Improvement:
1.We use 150 type gear box,which is longer life and more accurate.Normally, 100 type gear box is used.
2.100 type speed reducer is used instead 80 type.
The speed reducer and the gear box are very important to the machine.They control the whole machine,if there are some problems with these two parts,then,you have to change the gear box and speed reducer.In this case,the machine should be taken apart,because they are inside the machine.It takes much time,and sometimes you cannot install the machine correctly.So it is necessary to use better gear box and speed reducer.
3.New design knurling wheel is used to guarantee the even pressure and better bottom sealing.
4.Cup folding parts is controlled by three separate cams,and each folding clip can be adjusted by itself.
5.Change the Ø25 normal steel shaft to Ø30 imported steel shaft to be sttrengthened,longer life and more stable.
6.Organ type sucker is used for cup fan sucked to gaurantee powerful sucking and more successful.The life is much more longer than normal sucker.
Type: | ZW-D |
Cup size: | 16-32oz(different size mold exchanged) |
Suitable paper material: | 150-380g/m2 (single or double PE-coated paper) |
Capacity: | 30-40pcs/min |
Power source:: | 220V、380V 50HZ(please inform us your power in advanced) |
Total power: | 7KW |
Weight: | 2000KG |
Package size: | 2900 x 1500 x 1800 mm |
Working Air Source: | Air pressure 0.4Mpa;Air out-put:0.6m3/min |
| A:Top diameter: Min 80mm---Max 145mm B:Bottom diameter Min 60mm---Max 110mm C:Total height Min 30mm---Max 115mm D:Bottom knurling depth Min 4mm---Max 12mm E:Rim diameter Usually Φ2.5---Φ3 |
Type: | ZW-D |
Cup size: | 16-32oz(different size mold exchanged) |
Suitable paper material: | 150-380g/m2 (single or double PE-coated paper) |
Capacity: | 30-40pcs/min |
Power source:: | 220V、380V 50HZ(please inform us your power in advanced) |
Total power: | 7KW |
Weight: | 2000KG |
Package size: | 2900 x 1500 x 1800 mm |
Working Air Source: | Air pressure 0.4Mpa;Air out-put:0.6m3/min |
| A:Top diameter: Min 80mm---Max 145mm B:Bottom diameter Min 60mm---Max 110mm C:Total height Min 30mm---Max 115mm D:Bottom knurling depth Min 4mm---Max 12mm E:Rim diameter Usually Φ2.5---Φ3 |